Lantronix 900-598 User Manual

9: Services Settings

PremierWave XC User Guide

FTP Settings

The FTP protocol can be used to upload and download user files, and upgrade the PremierWave
firmware. A configurable option is provided to enable or disable access via this protocol.

Table 9-2 FTP Settings

FTP Settings

Description

State

Select Enabled or Disabled for the state of the FTP server.

To Configure FTP Settings

Using Web Manager



To configure FTP, click FTP in the menu bar.

Using the CLI



To enter the FTP command level: enable -> config -> ftp

Using XML



Include in your file: <configgroup name=”ftp server”>

Syslog Settings

The Syslog information shows the current configuration and statistics of the syslog. Here you can
configure the syslog host and the severity of the events to log.

Note:

The system log is always saved to local storage, but it is not retained through

reboots unless diagnostics logging to the filesystem is enabled. Saving the system log to
a server that supports remote logging services (see RFC 3164) allows the administrator
to save the complete system log history. The default port is 514.

Table 9-3 Syslog Settings

Syslog Settings

Description

State

Select Enabled or Disabled for the state of the syslog.

Host

Enter the IP address of the remote server to which system logs are sent for
storage.

Remote Port

Enter the number of the port on the remote server that supports logging services.
The default is 514.

Severity Log Level

Specify the minimum level of system message the PremierWave XC should log.
This setting applies to all syslog facilities. The drop-down list in the Web Manager
is in descending order of severity (e.g., Emergency is more severe than Alert.)