Alvarion SW VERSION 5.1 User Manual

Chapter 2 - Installation 

 

BreezeACCESS VL System Manual

 

The installation kit includes the following: 4 PHK40*16PT screws (1), 2 M4 
washers (2), 2 rotation bars (3) and 2 suction cups (4). 

Attach the rotation bars to the antenna and the suction cups to the rotation 

bars. Refer to Figure 2-18 for directions.  

Determine the location of the antenna on the glass. Attach it to the window by 

pressing the suction cups onto the glass. 

Connect the antenna cable to the connector located on the bottom side of the 

antenna. Use only the torque key supplied with the antenna. Do not over 
tighten. Do not use a wrench or a similar tightening tool. 

Rotate the antenna left or right so the domed surface of the antenna is facing 

the direction of the Base Station. Check the received Signal LEDs to ensure 
the antenna is aimed correctly. 

 

 

 

The suction cups are sensitive to weather conditions and may not hold in high temperatures or 
during rain. It is strongly recommended to mount the antenna on the wall using the supplied 
brackets.