Kramer Electronics RTBUS-21 User Manual
8
RTBUS-21 - Installing the RTBUS-21
5.2
Mounting the RTBUS-21 in the Table
To mount the unit, follow these steps:
Step 1: Insert the RTBUS-21 into
the hole cut into the table making
sure the outer rim is firm against the
surface of the table.
the hole cut into the table making
sure the outer rim is firm against the
surface of the table.
Step 2: From underneath the table,
slide the mounting brackets into the
appropriate slots.
slide the mounting brackets into the
appropriate slots.
Step 3: Tighten the butterfly
mounting screws securely upward
against the table.
mounting screws securely upward
against the table.
Step 4: Lock the mounting screws
into position with the locking
butterfly screws.
into position with the locking
butterfly screws.