NEC IP8800/S3600 User Manual

Page of 250
3.   
Troubleshooting Functional Failures in Operation
46
* If this system is the IGMP querier, the address displayed in "IGMP querying system" matches the address displayed 
in "IP Address"; however, if a different system is the IGMP querier, the address displayed in "IGMP querying system" 
does not match the address displayed in "IP Address."
4
Check the IGMP snooping configuration 
using the show igmp-snooping 
command.
Check the following:
- Check that the message below is displayed to confirm the existence of the IGMP 
querier which monitors group members. [IP8800/S3600]
(1) If the IGMP querier exists, the IGMP querier IP address is displayed.
     IGMP querying system: 192.168.11.20
*
(2) If the IGMP querier does not exist, nothing is displayed in "IGMP querying 
system:".
     IGMP querying system:
- If this system is the IGMP querier, confirm that an IP address is set for the VLAN.
(1) If an IP address is set for the VLAN, a message is displayed. 
     IP Address: 192.168.11.20
*
(2) If no IP address is set for the VLAN, nothing is displayed in "IP Address:".
     IP Address:
- If a multicast router is connected, check mrouter-port.
     > show igmp-snooping 100
     Date 2005/05/15 15:20:00
     VLAN 100:
       IP Address:192.168.11.20   Querier : enable
       IGMP querying system : 192.168.11.20
       Port (2): 0/1,0/3
       Mrouter-port:0/1
       Group Counts: 3
5
Execute the show igmp-snooping 
command with "group" parameter 
specified, and check IPv4 multicast 
group address.
Check the following:
- Confirm that the joined IPv4 multicast group address is displayed by the show 
igmp-snooping group command.
     > show igmp-snooping group 100
     Date 2005/05/15 15:20:00
       VLAN 100  Group counts:3
        Group Address     MAC Address
         224.10.10.10   0100.5e0a.0a0a
           Port-list  0/1-3
         225.10.10.10   0100.5e0a.0a0a
           Port-list  0/1-2
         239.192.1.1    0100.5e40.1606
           Port-list  0/1
No.
Troubleshooting Steps and
Command
Action