Netgear UTM50-100NAS User Manual

Firewall Protection

5-17

2. Click one of the following table buttons:

•

Disable. Disables the rule or rules. The “!” status icon changes from a green circle to a 
grey circle, indicating that the rule is or rules are disabled. (By default, when a rule is 
added to the table, it is automatically enabled.)

•

Delete. Deletes the rule or rules.

You may change the default outbound policy or define rules that specify exceptions to the default 
outbound policy. By adding custom rules, you can block or allow access based on the service or 
application, source or destination IP addresses, and time of day. An outbound rule may block or 
allow traffic between the DMZ and any external WAN IP address according to the schedule 
created in the Schedule menu.

To create a new outbound DMZ WAN service rule: 

1. In the DMZ WAN Rules screen, click the Add table button under the Outbound Services table. 

The Add DMZ WAN Outbound Service screen displays.

2. Enter the settings as explained in 

.

3. Click Apply. The new rule is now added to the Outbound Services table. The rule is 

automatically enabled.