Netgear UTM50-100NAS User Manual

5-42

Firewall Protection

•

Specific Times. The schedule is active only on specific hours of the selected day or days. 
To the right of the radio buttons, specify the Start Time and End Time fields (Hour, 
Minute, AM/PM) during which the schedule is in effect.

5. Click Apply to save your settings to Schedule 1.

Repeat these steps to set to a schedule for Schedule 2 and Schedule 3.

The Source MAC Filter screen enables you to permit or block traffic coming from certain known 
PCs or devices.

By default, the source MAC address filter is disabled. All the traffic received from PCs with any 
MAC address is allowed. When the source MAC address filter is enabled, depending on the 
selected policy, traffic is either permitted or blocked if it comes from any PCs or devices whose 
MAC addresses are listed in MAC Addresses table.

To enable MAC filtering and add MAC addresses to be permitted or blocked:

1. Select Network Security > Address Filter from the menu. The Address Filter submenu tabs 

appear, with the Source MAC Filter screen in view (see 

, which 

shows one address in the MAC Addresses table as an example).

Note: For additional ways of restricting outbound traffic, see 

.