Netgear UTM50-100NAS User Manual
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
10-12
Network and System Management
v1.0, January 2010
Configuring Remote Management Access
An administrator can configure, upgrade, and check the status of the UTM over the Internet via a
Secure Sockets Layer (SSL) VPN connection.
Secure Sockets Layer (SSL) VPN connection.
To configure the UTM for remote management:
1. Select Administration > Remote Management from the menu The Remote Management
screen displays.
2. Select one of the following radio buttons:
•
Yes. Enable HTTPS remote management. This is the default setting.
•
No. Disable HTTPS remote management.
3. As an option, you can change the default HTTPS port. The default port number is 443.
Note: When remote management is enabled and administrative access through a WAN
interface is granted (see
Web Management Interface is accessible to anyone who knows its IP address and
default password. Because a malicious WAN user can reconfigure the UTM and
misuse it in many ways, NETGEAR highly recommends that you change the
admin and guest default passwords before continuing (see
default password. Because a malicious WAN user can reconfigure the UTM and
misuse it in many ways, NETGEAR highly recommends that you change the
admin and guest default passwords before continuing (see
).
Figure 10-3
Warning: If you are remotely connected to the UTM and you select the No
radio button, you and all other SSL VPN users are disconnected when
you click Apply.
you click Apply.