Netgear UTM50-100NAS User Manual
Default Settings and Technical Specifications
A-1
v1.0, January 2010
Appendix A
Default Settings and Technical Specifications
You can use the Reset button located on the rear panel to reset all settings to their factory defaults.
This is called a hard reset (for more information, see
This is called a hard reset (for more information, see
•
To perform a hard reset, press and hold the Reset button for approximately eight seconds (until
the TEST LED blinks rapidly). The UTM returns to the factory configuration settings that are
shown in
the TEST LED blinks rapidly). The UTM returns to the factory configuration settings that are
shown in
•
Pressing the Reset button for a shorter period of time simply causes the UTM to reboot.
shows the default configuration settings for the UTM.
Table A-1. UTM Default Configuration Settings
Feature
Default behavior
Router Login
User login URL
https://192.168.1.1
Administrator user name (case sensitive)
admin
Administrator login password (case sensitive)
password
Guest user name (case sensitive)
guest
Guest login password (case sensitive)
password
Internet Connection
WAN MAC address
Use default address
WAN MTU size
1500
Port speed
AutoSense
Local Network (LAN)
Lan IP address
192.168.1.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
Disabled