Moxa Technologies MOXA AirWorks User Manual
MOXA AirWorks AWK-1100 User’s Manual
Web Console Configuration
3-10
NOTE
Make sure the file is a valid configuration backup file for AWK-1100.
TIP
If you want to back up or restore the configuration from a remote location over the Internet,
adjust the Timeout and Max no. of retries settings of TFTP Server for remote TFTP
configuration backup/restore to succeed.
adjust the Timeout and Max no. of retries settings of TFTP Server for remote TFTP
configuration backup/restore to succeed.
Resetting the Configuration to Factory Defaults
Clicking the Reset button resets the device configuration to factory defaults.
WARNING
Think twice before clicking the Reset button. Doing so will cause you to lose all of your current
configuration settings.
configuration settings.
Configuring TCP/IP-related Settings
Addressing
The IP address of the AP can be set manually (Set Manually) or automatically assigned by a
DHCP server on the LAN (Obtain from a DHCP Server). If you are manually setting the IP
address, Subnet mask, and Default gateway settings, set them appropriately, so that they comply
with your LAN environment. In addition, you can specify the Host name and Domain (DNS
suffix) of the AWK-1100.
DHCP server on the LAN (Obtain from a DHCP Server). If you are manually setting the IP
address, Subnet mask, and Default gateway settings, set them appropriately, so that they comply
with your LAN environment. In addition, you can specify the Host name and Domain (DNS
suffix) of the AWK-1100.