Polycom A6000 User Manual

Aruba Mobility Controllers: A200, A800, A2400, A6000

PN: 1725-36080-001_J.doc

CLI command configuration

All of the commands listed in the CLI Commands column above must
be entered under the

ap location

command.

The format is:

ap location x.y.z
phy-type g  (To make the changes for the “g” radio.)
  commands
!
phy-type a  (To make the changes for the “a” radio.)
  commands
!

Web-based configuration

1. Click the

Configuration

button.

2. In the navigation pane, select

Radio

from the

WLAN

sub-menu.

3. Click the

802.11b/g

tab.

4. For

Max Retries

, enter

for voice.

5. Select the

Short Preamble

check box.

6. For the

DTIM

period

, enter

7. For

Basic Rates

and

Supported Rates,

consult the facility’s RF site

survey to determine if coverage is sufficient to support all data
rates.

8. To assign the power and channel setting manually:

a. For

ARM Assignment

, select

Disabled.

b. Clear the

ARM Scanning

check box.

c. Set the

Default Channel

and

Initial Transmit Power

from their drop-

down lists.

d. For

Mode

, click the

Access-point

option.

9. Click the

Apply

button.