Black Box LGB1108A User Manual

724-746-5500 | blackbox.com

Page 127

Chapter 3: Configuration

• Timer Values: To set the GARP join timer, leave timer, and leave all timers, the unit is microseconds (ms).

Three different timers can be configured on this page:

- Join Timer: The default value for Join timer is 200 ms.

- Leave Timer: The range of values for Leave Time is 600–1000 ms. The default value for Leave Timer is 600 ms.

- Leave All Timer: The default value for Leave All Timer is 10000 ms.

• Application: Currently only supported application is GVRP.

• Attribute Type: Currently only supported Attribute Type is VLAN.

• GARP Applicant: This configuration is used to configure the Applicant state machine behavior for GARP on a particular port

locally.

- normal-participant: In this mode the Applicant state machine will operate normally in GARP protocol exchanges.

- non-participant: In this mode the Applicant state machine will not participate in the protocol operation.

The default configuration is normal participant.

• Buttons:

- Save: Click to save changes.

- Reset: Click to undo any changes made locally and revert to previously saved values

LGB1108A