Fujitsu V01 User Manual

Page of 138
 
IP-900 Series 
 
II
 
USING IP-900 Series SAFELY 
Handling of This Manual 
This manual contains important information regarding the safe use of IP-900 series.  Before 
attempting to use this product, read this document thoroughly, paying particular attention to the "Notes 
on Safety."  Be sure to keep this document in a safe and convenient location for quick reference. 
Fujitsu makes every effort to prevent users and bystanders from being injured and to prevent 
property damage.  Be sure to use this product in accordance with the instructions in this manual. 
Warning on Electromagnetic Interference 
 
The following notice is for USA users only. 
IP-900 series  has been tested and found to comply with the limits for a Class A digital device, pursuant 
to Part 15 of the FCC Regulations. These limits are designed to provide reasonable protection against 
harmful interference when the equipment is operated in a commercial environment. This equipment 
generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with 
the instruction document, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be 
required to correct the interference at his own expense. 
 
The following notice is for Canada users only. 
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing 
Equipment Regulations. 
 
The following notice is for EU (European Union) users only.  
This is Class A product of Electromagnetic Interference (EMI) standard. In a domestic environment 
this product may cause radio interference in which case the user may be required to make adequate 
measures.
 
 
This manual contains technology controlled by Foreign Exchange and Foreign Trade Law.  This 
document or a portion thereof must not be exported (or re-exported) from Japan without authorization 
from the appropriate Japanese governmental authorities in accordance with such laws. 
 
It is strictly inhibited to copy or reverse-engineer (reverse-assemble or reverse-compile) any programs 
included in the relevant equipment. 
Microsoft, Windows, Windows NT, Windows 2000, and Windows XP are trademarks or registered 
trademarks of Microsoft Corporation in the United States and other countries. 
 
- The contents of this document shall not be disclosed in any way or reproduced in any media without 
the express written permission of Fujitsu Limited. 
 
All Rights Reserved, Copyright 
©
 FUJITSU LIMITED 2008 -2009