Agilent Technologies 1670G User Manual

Triggering Examples

7 Check that the second analyzer is triggering on arm and that 

Count Time is set.

After the measurement is complete, you can interleave the trace lists of 
both state analyzers to see the activity executed by both coprocessors 
during related clock cycles.

You can use a similar procedure if you have only one processor, but 
want to monitor its activity with that of other system nodes, such as 
chip-select lines, I/O activity, or behavior of a watchdog timer. In some 
instances it may be easier to look at related activity with a timing 
analyzer.

"Special Displays" on page 128.

"To trigger timing analysis of a count-down on a set of data lines" on 
page 125.