Agilent Technologies 1670G User Manual

Using the Oscilloscope

4 Calibrate the Logic Trigger of the Self Cal.

a Obtain a BNC 50-W, 48-inch cable.

b Select Start. The instrument will prompt you to connect the 

cable to the appropriate location on the rear panel of the 
instrument.

c Select the Procedure field, then select Logic Trigger from 

the pop-up menu.

d Select the Start field and follow the instructions on the 

display.

e After completion of the Logic Trigger calibration, remove the 

cable from the instrument.

Protect the operational accuracy calibration 
factors

•

Facing the front panel, reach around to the lower right corner on the back 
of the logic analyzer. Flip the PROTECT/UNPROTECT switch to 
PROTECT (flip the switch down).