Manualsbrain.com
  1. Manuals
  2. Brands
  3. Yamaha
  4. YSP-40D
  5. User Manual

Yamaha YSP-40D User Manual

Download
Page of 129
45 
En
Playback
BA
S
IC
 
OP
ERA
T
IO
N
English
Press AUX1 (or AUX2) to play back a component 
connected to the AUX 1 (or AUX 2) jack on the 
rear panel of this unit.
Press AUX3 to play back a component connected 
to the AUX 3 input jack on the front panel.
Once an input source is selected (see page 44), you can 
play back the selected input source.
This section uses a DVD player as an example of the playback 
source.
y
For details on your TV and DVD player, refer to the respective 
owner’s manual.
1
Turn on the power of your DVD player.
2
Switch to the video input on your TV using 
the remote control supplied with the TV and 
display the DVD menu screen.
If necessary, turn down the volume of your TV until no 
sound is heard.
3
Press DVD to select DVD as the input source.
4
Play back DVD on your DVD player using the 
supplied remote control.
Audio signals from your DVD player are output from 
this unit.
y
• You can use the supplied demonstration DVD to check the 
digital signals being input at the DVD player with the digital 
connection (optical/coaxial/HDMI). The input channel and LFE 
indicators light up when this unit detects the 5.1-channel signal 
input at the optical/coaxial/HDMI jack. If the 
 indicator 
lights up, confirm the settings of the digital output, bitstream 
output, DTS output, and/or HDMI output of the DVD player.
• If the output volume is too low, increase the volume of this unit 
to around 45.
• If you have set the appropriate remote control codes for your 
TV and DVD player, you can use the remote control supplied 
with this unit to operate these components. For details on how 
to set remote control codes, see page 107.
Playing back sources
Note
AUX1
A U X 1
A U T O
AUX3
A U X 3
Note
DVD
PCM