Yamaha YSP-40D User Manual

You can enjoy 2-channel and 5-channel stereo playback as the beam modes by pressing STEREO on the remote control.

• When you play back Dolby Digital audio signals in the 2-channel or 5-channel stereo playback, the dynamic range becomes 

compressed. If the volume level decreases to the extreme, use other beam modes except My Beam.

• When the 2-channel or 5-channel stereo playback is selected as the beam mode, the surround modes (see page 62) and the CINEMA 

DSP programs (see page 69) become ineffective.

Sounds are output from the front right and left channels. 
This is ideal for playing back hi-fi sources, such as CDs, 
and can be used to replace your TV speakers.

“STEREO” appears in the front panel display.

When you play back multi-channel sources, all signals except 
those from the front left and right channels are mixed down and 
output from the front left and right channels. No audio is output 
from the center and surround channels.

Sounds are output from front left and right, center, and 
surround left and right. This is ideal for playback in a large 
listening area or at a party.

“5CH STEREO” appears in the front panel display.

S T E R E O

5 C H   S T E R E O