Panasonic PT-DW730EL User Manual

You can project the optimal image with contrast 

by controlling the gradation in accordance with the 

image.

1)  Press ▲▼ to select [AI]. 
2)  Press ◀▶ or the <ENTER> button.

 

z

The [AI] individual adjustment screen is 

displayed.

3)  Press ◀▶ to switch [AI]. 

 

z

The setting will change as follows each time 

you press the button. 

AI correction is enabled. 

AI correction is disabled. 

The projector will automatically detect the input signal, 

but you can set the system method manually when 

an unstable signal is input. Set the system method 

matching the input signal. 

1)  Press ▲▼ to select [SYSTEM 

2)  Press the <ENTER> button. 
3)  Press ▲▼ to select the system 

■When entering signals to the 

 

z

Select [AUTO], [NTSC], [NTSC4.43], [PAL], 

[PAL-M], [PAL-N], [SECAM], or [PAL60]. 

 

z

Set it to [AUTO] normally. 

 

z

Switch the setting to the signal method for the TV 

used. The NTSC signal method is used in Japan. 

 

z

Setting [AUTO] will automatically select [NTSC], 

[NTSC4.43], [PAL], [PAL-M], [PAL-N], [SECAM], or 

[PAL60]. 

■When entering signals to the 

 

z

Only during 480i, 576i, or 576p signal input

Select [RGB] or [YC

B

C

R

]. 

 

z

Only during VGA60 or 480p signal input

Select [VGA60], [480p], or [480pRGB]. 

 

z

During movie signal input other than previously 

listed 

Select [RGB] or [YP

B

P

R

]. 

 

z

Refer to “List of compatible signals” (



 page 102) for 

compatible signals.