Manualsbrain.com
  1. Manuals
  2. Brands
  3. Panasonic
  4. PT-DW730EL
  5. User Manual

Panasonic PT-DW730EL User Manual

Download
Page of 108
[ADVANCED MENU]
ENGLISH - 51
Settings
Select [ADVANCED MENU] from the main 
menu, and select the item from the sub-menu. 
Refer to “Navigating through the menu” 
(
 page 41) regarding the operation of the menu 
screen. 
 
z
After selecting the item, press ▲▼◀▶ to set. 
[DIGITAL CINEMA REALITY]
You can increase the vertical resolution and enhance 
the picture quality by performing the cinema 
processing when the PAL (or the SECAM) 576i signal, 
the NTSC 480i, 1080/50i, and 1080/60i signals are 
input. 
1)  Press ▲▼ to select [DIGITAL CINEMA 
REALITY]. 
2)  Press ◀▶ to switch [DIGITAL CINEMA 
REALITY]. 
 
z
The setting will change as follows each time 
you press the button.
[AUTO]
[OFF]
[25p FIXED] 
(when a 576i or 1080/50i signal is input) 
[30p FIXED] 
(when a 480i or 1080/60i signal is input) 
[AUTO]
Performs automatic detection 
and cinema processing. (Factory 
default)
[OFF]
Unforced cinema processing.
[25p FIXED]
Forced cinema processing (2:2 
pulldown) is performed when a 
576i or 1080/50i signal is input.
[30p FIXED]
Forced cinema processing (2:2 
pulldown) is performed when a 
480i or 1080/60i signal is input.
Note
 
z
In [DIGITAL CINEMA REALITY] mode, the picture 
quality will degrade when a signal other than the 
2:2 pulldown is set as [25p FIXED] or [30p FIXED]. 
(Vertical resolution will degrade.) 
[BLANKING]
The blanking width is adjusted when there are noise 
at the edge of the screen or the image is slightly 
running out from the screen when an image from the 
VCR or other devices are projected. 
1)  Press ▲▼ to select [BLANKING]. 
2)  Press the <ENTER> button. 
 
z
The 
[BLANKING] adjustment screen is 
displayed. 
3)  Press ▲▼ to select the adjustment 
item. 
4)  Press ◀▶ to adjust the blanking. 
 
z
Changes within the following range. 
For PT-DW730E
Left to right: 0 - 639
Top to bottom: 0 - 399. 
For PT-DX800E
Left to right: 0 - 511
Top to bottom: 0 - 383. 
When correcting the upper blanking of the screen (top) 
Press ◀ to move the 
blanking zone upward. 
Press ▶ to move the 
blanking zone downward. 
When correcting the lower blanking of the screen (bottom) 
Press ▶ to move the 
blanking zone upward. 
Press ◀ to move the 
blanking zone downward. 
When correcting the left hand blanking of the screen (left) 
Press ▶ to move the 
blanking zone to the right. 
Press ◀ to move the 
blanking zone to the left. 
When correcting the right hand blanking of the screen (right) 
Press ◀ to move the 
blanking zone to the right. 
Press ▶ to move the 
blanking zone to the left. 
[ADVANCED MENU]