Panasonic ET-PKD75 Leaflet

1

This ceiling mount bracket is to be used when mounting DLP™-based projectors to the high
ceiling. 

Vertical correction angle:

+5°, -17°

Horizontal correction angle:

±2.5°

Dimensions (W x H x D): 

509 x 345 x 343 mm 
(20-1/32˝ x 13-9/16˝ x 13-1/2˝)

Weight:

7.5 kg (16.5 lbs)

Weights and dimensions shown are approximate. Specifications subject to change without notice.

Digital Light Processing and DLP are trademarks of Texas Instrumets.

Attachment plate  . . . . . . . . . . . . . . . .1
Angle adjuster  . . . . . . . . . . . . . . . . . .1
Adjuster pole A  . . . . . . . . . . . . . . . . .1
Adjuster pole B  . . . . . . . . . . . . . . . . .1
Projector mount bracket  . . . . . . . . . . .1

Pole fixer  . . . . . . . . . . . . . . . . . . . . . .1
Safety fitting . . . . . . . . . . . . . . . . . . . .1
Washer-fitted screws (M6 x 12)  . . . . .29
Washer-fitted screws (M4 x 8) . . . . . . .4

Caution:
Mounting should be done by a qualified technician.  Make sure that the mounting (ceiling) area has
sufficient strength.  Read the enclosed mounting instructions thoroughly before starting. 

As of September 2004

unit: mm (inch)

(Dimensions given in inches are approximate.) 

Note: This illustration is not drawn to scale.

Ø49 (1-15/16˝)

237

29

(9-11/32˝)

149

(5-7/8˝)

175

(6-7/8˝)

(1-5/32˝)

438–558

(17-1/4˝–21-31/32˝)

350 (13-25/32˝)

314 (12-3/8˝)

120

54 (2-1/8˝)

(4-23/32˝)

314

(12-3/8˝)

140

(5-1/2˝)

Ø43 (1-11/16˝)

175 (6-7/8˝)

220 (8-21/32˝)

Ø50

(1

-31/32˝)

Ø50

(1

-31/32˝)

Ø11 (7/16˝)