Panasonic PT-DX800E User Manual

■When selecting [DEFAULT] or 

 

z

Automatic adjustment is executed. 

[PROGRESS] is displayed while automatically 

adjusting. When the adjustment is complete, 

the system returns to the 

[AUTO SETUP] 

screen.

■When selecting [USER] in Step 3)

4)  Press ▲▼ to select [DISPLAY DOTS] 

and press ◀▶ to adjust [DISPLAY 

5)  Press ▲▼ to select [MODE].
6)  Press the <ENTER> button.

 

z

Automatic adjustment is executed. 

[PROGRESS] is displayed while automatically 

adjusting. When the adjustment is complete, 

the system returns to the 

[AUTO SETUP] 

screen.

You can switch the setting when the external 

equipment is connected to the <DVI-D IN> terminal of 

the projector and the image is not projected correctly. 

1)  Press ▲▼ to select [DVI-D IN].
2)  Press the <ENTER> button.

 

z

The [DVI-D IN] screen is displayed.

3)  Press ▲▼ to select [DVI EDID].
4)  Press ◀▶ to switch [DVI EDID]. 

 

z

The setting will change as follows each time 

you press the button.

Switch between fine settings for a 

moving image and for a still image. 

Select this mainly when an 

external device (DVD player, etc.) 

for outputting video signals of a 

moving image system is connected 

to DVI-D IN. 

Mainly use this when an external 

device (PC, etc.) for outputting 

video signals of a still image 

system is connected to DVI-D IN.

5)  Press ▲▼ to select [DVI SIGNAL 

6)  Press ◀▶ to switch [DVI SIGNAL 

 

z

The setting will change as follows each time 

you press the button.

Select when the external equipment 

(computers, etc.) is connected via 

DVI terminal output. 

Select when the external equipment 

(DVD players, etc.) is connected 

via HDMI terminal output using a 

conversion cable, etc. 

 

z

The optimal setting is different depending on the output 

setting of the connected external equipment. Refer 

to the instruction manual of the external equipment 

regarding the output of the external equipment. 

 

z

The data for Plug and play will change when the 

setting is changed. Refer to “List of compatible 

signals” (



 page 102) for the resolution supporting the 

Plug and play. 

You can set the on-screen display. 

1)  Press ▲▼ to select [ON-SCREEN 

 

z

The 

[ON-SCREEN DISPLAY] screen is 

displayed. 

3)  Press ▲▼ to select an item, and press 

◀▶ to change the setting. 

■[OSD POSITION]

Set the position of the menu screen (OSD). 

 

z

The setting will change as follows each time 

you press the button.