Pioneer RM-V4000V User Manual

(5) Paste spacer A (BMR1073) to the top board of the

multi-projection unit and spacers B (BMR1074) to the

two sides at the

1234

position shown in the figure after

peeling off the seal.

* Paste after adjusting the

center of the top board

to that of spacer A.

* Paste without cover-

ing the fan.

(6) Insert the multi-projection unit from the rear of the

unit in this state.

Unit

(7) Attach the attachments R and L to the unit through the

top board of the unit using the screws (M6

20) and

then attach attachments R and L to the unit from the

back using screws (M6

20). (2 screws

2 locations).

(9) Attach the cover (BNE1012) to the top board of the unit

using the four screws (M5

15).

Screw (M5

15)

INSTALLATION AND ASSEMBLY

*Drop the screw-lock fluid to screws so as not to loosen.

(4 points)

(8) Check the Focus and reajust if necessary.