OmniMount TILT-PA User Manual
12
To adjust tilt
1. Hold A with 3/4” Socket
2. Loosen B with 3/4” Socket
3. Loosen C with 9/16” Socket
4. Position Display
5. Tighten A,B, & C
C.
B.
A.
Step 10 — Adjusting Tilt
PN —9/05
Specifications are subject to change without prior notice.
Every effort has been made to provide accurate and error-free assembly and installation. Omni-
Mount Systems disclaims liability for any difficulties arising from the interpretation of information
contained in these instructions. If OmniMount products are used for purposes other than their
original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for
injuries or property damage, direct, indirect, or consequential, which may arise from the inability
to use this product safely, properly, and in the manner for which it has been designed and manufac-
tured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or
accident.
Every effort has been made to provide accurate and error-free assembly and installation. Omni-
Mount Systems disclaims liability for any difficulties arising from the interpretation of information
contained in these instructions. If OmniMount products are used for purposes other than their
original intent, OmniMount, its distributors and retailers shall not be held responsible or liable for
injuries or property damage, direct, indirect, or consequential, which may arise from the inability
to use this product safely, properly, and in the manner for which it has been designed and manufac-
tured. Warranty does not apply to products which have been lost, damaged by misuse, abuse, or
accident.
Installation Instructions
TPUM-1: Tilting Pipe Adapter
•
Designed for 26” - 55” Flat Panel TV’s
•
Maximum Weight Capacity: 175 lbs. (79.4 Kg)
•
Connects to 1.5” NPT Pipe