Sony 4-130-433-13(2) User Manual

Should you encounter a problem with 
your system, do the following:

Make sure the power cord and 
speaker cords are correctly and 
firmly connected.

Find your problem in the checklist 
below, and take the indicated 
corrective action. 

If the problem persists, contact your 
nearest Sony dealer.
Note that if service personnel changes 
some parts during repair, these parts 
may be retained.

• Press DISPLAY once while the system 

is turned off. The demonstration 
disappears.

• The power cord is disconnected or a 

power failure occurred. Redo “Setting 
the clock” (page 16). If you have set the 
timer, redo “Using the timer” (page 36).

• The clock is not set. Set the clock 

(page 16).

• A power failure has occurred. Set the 

clock (page 16) and timer settings 
(page 36) again.

• Turn MASTER VOLUME clockwise 

(or press VOLUME + repeatedly on the 
remote).

• The headphones are connected to the 

PHONES jack.

• Check the speaker connections 

(page 15).

• There is no audio output during 

Recording Timer.

• Check that the subwoofer is connected 

securely and correctly to the unit.

• Turn MASTER VOLUME clockwise 

(or press VOLUME + repeatedly on the 
remote) or turn MIC LEVEL clockwise 
to adjust the microphone volume.

• Make sure the microphone is connected 

to the MIC jack correctly.

When the "/1 indicator flashes

Immediately unplug the power cord, 
and check the following items.
• If your system has a voltage selector, 

is the voltage selector set to the 
correct voltage?

• Are you using only the supplied 

speakers?

• Are the + and – speaker cords short-

circuited?

• Is anything blocking the ventilation 

holes of the unit?

After checking the above items and 
fixing any problems, plug in the power 
cord again and turn on the system. If 
the STANDBY indicator still flashes, 
or if the cause of the problem cannot 
be found even after checking all the 
above items, consult your nearest 
Sony dealer.

l