Barco R9002119 User Manual

4-3

5975188 RETRODATA 808s 210397

1

Comp. Video

1

2

S-Video

1

/Comp. Video*

2

3

RGB

3

4/5

RGB

4 or 5

4/5

Component video

6

4/5

RGB with Tri level sync

7

4/5

Component video
with Tri-level sync

8

Only available when the optional Tri-level sync module is
installed.

*

Video or S-Video : switchable in the Picture Tuning menu.

With the digit buttons on the RCU, it is possible to select input
sources, Video, S-Video, RGsB or RGBS, RG3sB or RGB3S.

When a valid and available source is selected, there will be informa-
tion displayed on the screen about that source (if "Text" is on).  This
information includes :

- Source number
- Horizontal frequency
- Vertical frequency

Source 2
Fh= 15.6 kHz
Fv= 50 Hz

When the entry is a non valid source
number, a warning appears on the screen : 'input not available'.

WARNING

input not 
available

When a valid source number is selected, the projector will display this
source or it will wait on the selected source number until the source

WARNING

source not 
available

becomes available.  A message 'source not available' will be dis-
played for a short time.

The analog picture controls can be adjusted with the RCU.  The
control keys are located on the lower right side of the key panel of the
RCU and indicated with the name of the control and an icon.

BRIGHTNESS

35

189

When an analog picture control is pressed, a text box with bar scale
and the function name of the control, e.g. 'brightness...' appears on
the screen (only if 

'TEXT' is ON).  The length of the bar scale indicates

the current memorized setting for this source.  The bar scale changes
as the + or -  buttons of the control are pressed.

A correct 'brightness' setting is important for good image reproduc-
tion.  Adjust the brightness with the + or - button (RCU) until the
darkest parts of the picture appear black.
A bar scale gives a visual indication on the screen of the current
brightness setting while pressing on the above  indicated keys.  If the
bar scale is not visible on the screen, press '

TEXT' key once and retry

the above indicated keys.
The bar scale increases when pressing on the + button (higher
brightness) and decreases when pressing on the - button (lower
brightness).

A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting
conditions. If the Contrast Control is too low, the picture will be too
dim. If it is set too high, the picture may be too bright and not sharp.
A bar scale gives a visual indication on the screen of the current
contrast setting while pressing the + or - buttons (RCU).  If the bar
scale is not visible on the screen, press '

TEXT' key once and retry the

above indicated keys.
The bar scale increases when pressing on the + button (higher
contrast) and decreases when pressing on the - button (lower
contrast).