Barco R5905604-00 Leaflet
http://www.barco.com/en/products-solutions/projectors
For more information and Maintenance Guidelines,
check the Detailed User Manual on:
check the Detailed User Manual on:
- Remove the lens before transporting the projector.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
- To save lamp lifetime, first switch the projector to standby mode
and wait two minutes, then switch off the main power.
- Ensure that the projector is operating with clean filters.
- Do not block the ventilation in -and outlets.
- Using the projector at a non recommended tilt angle will reduce the lifetime of the lamps
or create unexpected behaviour of the unit.
- Laser light can cause severe damage to the DMD. This damage is not covered by warranty.
10
Important Info
R5905604-
00 MAN QSG PF-
serie
s
see user manual
ADVANCED
service information
SERVICE
normal/eco/power
MODE
information on lamp status
INFO
select language
LANGUAGE
adjust keystone
KEYSTONE
adjust lens shift
LENS SHIFT
adjust lens zoom
LENS ZOOM
adjust lens focus
LENS FOCUS
modify image aspect ratio
ASPECT RATIO
adjust image colour
COLOR
adjust image contrast
CONTRAST
adjust lamp brightness level
BRIGHTNESS
Toggle between input sources
INPUT
MODE
M
INFO
i
SERVICE
i
ADVANCED
KEYSTONE
BRIGHTNESS
CONTRAST
COLOR
LENS ZOOM
LANGUAGE
INPUT
LENS FOCUS
ASPECT RATIO
LENS SHIFT
9
OSD Lite Menu
8
Starting Projector
OFF/STBY
ON
Error
During Start-up
1 sec
1 sec
1 sec
1 sec
1 sec
Status Led
IR Position
Front
IR Position
Rear
7
Remote Control
Quick Keys
Quick Key 1
Quick Key 2
Push Menu-UP twice
for instant ‘Picture Mute’
for instant ‘Picture Mute’
(for Remote and keypad)
Push Menu-OK for
quick access to the
Focus/Zoom Menu
quick access to the
Focus/Zoom Menu
Feedback LED
Menu - UP
Menu - RIGHT
Menu - UP
Menu - RIGHT
Menu - OK
Menu - LEFT
Menu - DOWN
Home/Menu
Battery Lid
(Slide down
to open)
(Slide down
to open)
Power
On/StandBy
6
Input Cables
(See User Manual for detailed info on Inputs and PiP)
130
260
110
220
138,5
(193)
Unit Weight: 12,6 kg
M4x8 MAX.
(4x)
(4x)
Please check the manual of your
supportsystem for compatability
supportsystem for compatability
*(Ceiling mount system is not included)
5
Ceiling Mount*
4
Rear Cover
Flip open the rear lid
to gain access to the inputs panel.
Please consult the
full User Manual
for detailed info on
Lens Assembly or
Lens Replacement.
This should only be
done by a qualified
Service Technician,
preferrably prior to
ceiling mounting.
3
Lens Assembly
Direction to release
the side covers from the unit.
Loosen the captive screws
on each of the two side panels.
on each of the two side panels.
2
Side Cover Removal
(EU/US/CH)
user
manual
AAA (2x)
1
Packaging Contents
Quick Setup Guide
Congratulations on purchasing
this product
this product
PFWX-51B
PFWU-51B