Runco CL-810 / SDC-1 User Manual
46
Runco CL-810 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
4.5
Using
Picture-In-Picture/
Using
Picture-In-Picture/
Picture-By-Picture
(PIP/PBP)
(PIP/PBP)
For PIP and PBP purposes, there are two groups
of inputs separated by their display modes:
of inputs separated by their display modes:
• Video (SD) group: Video, S-Video and
Component 1 inputs.
• Graphic (HD) group: HDMI and
Component 2/RGB inputs.
PIP / PBP shows one input from the Graphic group within or beside one input from the
Video group.
Video group.
• Press PBP to enable the PBP function. Press PBP again to switch the screens left to
right. Press PBP again to turn PBP off.
• Press ACT (Active) to switch to the active window. (You can only switch inputs in the
active window.)
• Press PIP to enable the PIP function. Press PIP again to switch the main window.
Press PIP again to turn PIP off.
• To adjust the size of the PIP window, press PIP+ or PIP-.
• Adjust the position of the PIP window with the arrow buttons (
,
,
,
).
4.6
Using the On-Screen
Menus
Using the On-Screen
Menus
• Press the MENU button on the remote control to display the Main Menu. To select a
menu item, use the UP and DOWN buttons on the remote control to highlight it. Press
ENTER or
ENTER or
to confirm your selection.
• Use the arrow buttons to select menu items or change settings.
• Press EXIT to return to the previous menu.
• Press MENU to turn off the OSD menu. (When the Main Menu is displayed, pressing
EXIT also turns off the menu.)
The CL-810 OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending
on the selected input source and signal characteristics, some menu options may not be
available.
on the selected input source and signal characteristics, some menu options may not be
available.
PIP and PBP are not available when the CL-810 is used with the
SDC-1 System Expansion Device.
SDC-1 System Expansion Device.
Note
FOCUS
LENS
ZOOM
PBP
PIP
PIP+
FOCUS
ACT
ZOOM
PIP-
LENS