Runco LS-HB User Manual

Runco LS-HB/LS-HB Ultra Installation/Operation Manual

PRE

3.2
Quick Setup

Table 3-1 gives a quick overview of the LS-HB installation process. The sections following
this one provide detailed instructions.

Installation should be performed by a qualified custom video
installation specialist.

Table 3-1. Installation Overview

Step

Procedure

For Details, Refer

to page...

Choose a location for the projector

Install primary projection lens

Install anamorphic lens mounting assembly (optional)

Mount the projector

Connect signal sources to the LS-HB

Connect external controller to RS-232 port and/or IR repeater
system (optional)

Connect 12-volt trigger output to retractable screen or other,
+12V trigger-activated equipment (optional)

Apply power to the projector

Primary lens adjustments: projected image size (zoom), position
(shift) and focus

19, 41

Change the OSD Language (optional)

For rear-screen and/or ceiling-mount installations, select the
proper picture orientation

Install and adjust secondary anamorphic lens (optional)

Projector calibration: adjust the following for each input; save
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance

Note