Runco LS-HB User Manual
Runco LS-HB/LS-HB Ultra Installation/Operation Manual
15
PRE
L
Y
3.2
Quick Setup
Quick Setup
Table 3-1 gives a quick overview of the LS-HB installation process. The sections following
this one provide detailed instructions.
this one provide detailed instructions.
Installation should be performed by a qualified custom video
installation specialist.
installation specialist.
Table 3-1. Installation Overview
Step
Procedure
For Details, Refer
to page...
1
Choose a location for the projector
2
Install primary projection lens
3
Install anamorphic lens mounting assembly (optional)
4
Mount the projector
5
Connect signal sources to the LS-HB
6
Connect external controller to RS-232 port and/or IR repeater
system (optional)
system (optional)
7
Connect 12-volt trigger output to retractable screen or other,
+12V trigger-activated equipment (optional)
+12V trigger-activated equipment (optional)
8
Apply power to the projector
9
Primary lens adjustments: projected image size (zoom), position
(shift) and focus
(shift) and focus
10
Change the OSD Language (optional)
11
For rear-screen and/or ceiling-mount installations, select the
proper picture orientation
proper picture orientation
12
Install and adjust secondary anamorphic lens (optional)
13
Projector calibration: adjust the following for each input; save
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Sharpness
• White Balance
Note