Ricoh PJ WX3131 User Manual

9

If your line voltage is 0 to 40 V, use one of the following types of cable/plug.

Plug

configuration Plug type

Australian

240 V

10 A

North American

240 V

15 A

Switzerland

240 V

6 A

Line voltage

EURO

UK

220 – 240 V

220 – 240 V

200 – 240 V

200 – 240 V

200 – 240 V

Plug

configuration Plug type

Line voltage

Use a 5 A fuse which is approved by 

ASTA or BSI to BSI362.

Always replace the fuse cover after 

changing the fuse.

Never operate this unit immediately after moving it from a cold location to a warm location. 

When the unit is exposed to such a change in temperature, moisture may condense on the 

lens and the crucial internal parts. Do not use the unit for at least  hours when there is an 

extreme or sudden change in temperature to prevent the unit from possible damage.

Do not place in hot locations, such as near heating equipment.  Doing so could cause 

malfunction, and shorten the life of the projector.

Avoid locations with oil or cigarette smoke.  Doing so will dirty the optical parts, shortening 

their lives, and darkening the screen.

Do not use this product in the upright position or tilt it up or down by more than 0° from 

level. Doing so may cause a failure or shorten the life of the product.

Using this instrument near a TV or radio may cause interference to the images or audio 

sound. If this happens, move it away from the TV or radio.

Moving the projector from a low-temperature room to a high-temperature room may cause 

condensation on the lens or internal parts. If you continue to use it in that situation, it may 

malfunction. Wait until the condensation naturally disappears.

In a high altitude location where air is thin, cooling efficiency is reduced so use the 

projector with [

Fan mode] set to [High]. 

Only plug the power cord into outlets rated for use with the power cord’s specified voltage range. 

Do not overload extension cords or power strips as this can result in fire or electric shock.

Route the power cable or the connecting cable away from where people could trip over it. 

The projector may fall down, which could result in severe injury.

Be sure the power cord is easily reached for unplugging in case of emergency. Do not 

place any obstacles near a wall outlet in which the cord is plugged.

Do not use volatile liquids, such as an insect spray, near the unit.  Do not leave rubber or 

plastic products touching the unit for a long time as they will leave marks on the finish.

Do not use a chemically saturated cloth.

•

•

•

•

•

•

•

•

•