Runco CL-510LT User Manual

6. Additional Information

27

■

It is normal for lamp to be darker when this unit 
has been used for a period of time.

■

" Lamp life is expired ! Please install new lamp. And 
reset the lamp timer" message will be displayed for 
30 seconds on the screen if the lamp has operated 
for 950 hours.

■

" Please change the lamp, Lamp will exceed its 
lifetime after (hours):" message will be displayed 
on the screen for 30 seconds for each time turning 
on, if the lamp has operated for 980 hours. And 
the number will count down continuously.

■

"Please change the lamp !" message will display on 
the screen all the time and the POWER LED will 
blink in orange and green sequentially if the lamp 
has operated for more than (1,000) hours.

■

The power will turn off automatically after 10 
minutes.

1.

Loosen the screw of 
front lamp cover

  

2.

Take off the front lamp 
cover.

3.

Loosen the two 
screws of lamp 
module. 

4.

Pull out the lamp 
module horizontally. 

5.

Insert the new lamp 
module into this 
projector 
horizontally until it 
is securely in place.

6.

Tighten the two screws 
of lamp module.

Lamp life is expired !

Please install new lamp

And reset the lamp timer

Please change the lamp !

Lamp will exceed its 
lifetime after (hours):

Please change the lamp !

1

2