Ricoh PJ WX3231N User Manual

Basic operations

Turn on the power.

Turn on the power by following the instructions in “

Turn the power on”

Select the language and the lamp power during initial

startup.

When the projector is used for the first time after purchase, the start menu for
language selection, lamp power selection and configuration is displayed in English. (If
the screen is out of focus, adjust it according to the step

Use the , ,

button to select the desired language and

then press the button.

English
French
German
Italian
Spanish
Portuguese
Russian
Swedish
Turkish

Polish
Norwegian
Finnish
Czech
Hungarian
Greek
Danish
Dutch
Rumanian

Japanese
Chinese (simplified)
Chinese (traditional)
Korean
Indonesian
Thai
Arabic

The message for setup confirmation is displayed in the selected language.
Then, the menu for lamp power selection and configuration is displayed. It is
automatically set as Standard. To change the setting, follow the step

Use the or button to select the lamp power and press the

button.

The lamp power, if selected, will be toggled without pressing the

button. The display

automatically disappears in a few seconds.

Notes

When the projector is turned on the next time, the start menu will not appear upon
startup. However, if [

Reset all] is executed from the Default setting 2 menu

p.43

the start menu will be displayed the next time the power is turned on.
The language can also be set via the

Display setting menu

p.39

and Lamp power

via the

Default setting 1 menu

p.42

This owner’s manual assumes that English has been selected.

Activate the connected device.

Turn on and start the connected device such as a computer.

Press the INPUT button.

An image of the connected equipment is projected.
Each time you press the

INPUT button, it switches to the input of the connected

equipment that is outputting video signals.

•