Ricoh PJ WX3231N User Manual
44
[Remote control]
Sets a remote control code from types. You can set each code respectively for up to
projectors. The factory setting is [
projectors. The factory setting is [
1].
To switch codes, set the same code for the projector and the remote control.
A remote control code is applied after the setting is done.
A remote control code is applied after the setting is done.
You cannot operate the remote control if the codes of the projector and the remote
control do not match.
control do not match.
Remote control code setting for remote control
Set the same
remote control code switch as the projector.
[Key lock]
Avoid operating errors by locking the projector’s control panel buttons. (The remote
control operations are still available.)
Control panel operations are locked after the setting is done, and operations using the
control panel buttons are disabled.
control operations are still available.)
Control panel operations are locked after the setting is done, and operations using the
control panel buttons are disabled.
To release the key lock, set the [
Key lock] to [Off] using the remote control. You
can also set the [
Key lock] to [Off] by pressing the [RETURN/MUTE] button on
the projector for 10 seconds. (When operating the main unit, the LAMP and TEMP
indicators will glow orange for 3 seconds, and the projector will beep.) Note that
when Network or USB memory input is selected, the [
indicators will glow orange for 3 seconds, and the projector will beep.) Note that
when Network or USB memory input is selected, the [
Key lock] cannot be set to [Off]
with the [
RETURN/MUTE] button on the projector.
[Closed Caption]
Off
: Closed Caption is not displayed.
CC1-CC4 : Displays the dialogue and narration of TV programs and videos that are
(Caption) closed captioned.
T1-T4
(Caption) closed captioned.
T1-T4
: Displays information not related to the current program, such as weather,
(Text)
stock data or the like, when it is provided by individual station.
Note
This projector supports a special feature called closed captioning which allows
subtitles to be displayed at the bottom of the picture. This is pursuant to the
Regulations set forth by the US Federal Communications Commission (FCC). Due
to the different broadcasting or signaling system, it may not operate correctly in
other regions or countries where TV programs do not support closed captioning.
Closed Caption may not appear correctly depending on the signal conditions or the
recording conditions of videotapes.
If the
subtitles to be displayed at the bottom of the picture. This is pursuant to the
Regulations set forth by the US Federal Communications Commission (FCC). Due
to the different broadcasting or signaling system, it may not operate correctly in
other regions or countries where TV programs do not support closed captioning.
Closed Caption may not appear correctly depending on the signal conditions or the
recording conditions of videotapes.
If the
Text is not available, only a black rectangle background may appear on screen.
To prevent this from appearing, set the Closed Caption to [
Off].
When you switch channels of broadcasting programs or play a videotape using
“trick play” functions such as rewind or fast-forward, the operations in the connected
device may cause the
“trick play” functions such as rewind or fast-forward, the operations in the connected
device may cause the
Caption or Text to remain on the screen for a while.
Closed Caption is available for Video and S-Video input images.
•
•
•
•
•
•
•
•
•
•
•
Using the menus 1 (Continued)