Sanyo PLC-XP200L User Manual

Press the FREEZE button on the remote control to freeze 

the picture on the screen. To cancel the FREEZE function, 

press the FREEZE button again or press any other button.

Press and hold the FILTER button for more than five seconds 

to operate electrically operated filter to replace the filter.

Reduce  the  upper  width  with 

Point 

e

 button. 

Reduce  the  lower  width 

with Point 

d

 button.  

Reduce  the  left  part  with 

Point 

7

 

button.  

Reduce  the  right  part  with 

Point 

8

 button.  

• The white arrows indicate that there is no correction.

• A red arrow indicates the direction of correction.

• An arrow disappears at the maximum correction.

• If you press the KEYSTONE button on the remote 

control again while the Keystone dialog box is being 

displayed, the keystone adjustment will be canceled.

• The adjustable range can be limited depending on the  

input signal.

• “Keystone” disappears after 10 seconds.

✔

Press the KEYSTONE button on the remote control. The 

“Keystone” appears on the screen.

Use the Point ed7 8 buttons to correct keystone 

distortion. The keystone adjustment can be stored (pp.44, 

48).

✔

Move the pointer on the screen with this button.

Press POINTER button on the remote control to display the 

Pointer on the screen. 

P-Timer display

Press the P-TIMER button on the remote control. The Timer 

display “00 : 00” appears on the screen and starts to count 

time (00 : 00–59 : 59). 

To stop the P-TIMER, press the P-TIMER button. 

To cancel the P-TIMER, press the P-TIMER button again.