Sanyo 1AV4U19B25500 User Manual

Chapter 7 Controlling the projector

How to set the timer

Set a day or date

To set the timer event at the same time everyday or every week,

Select day entry with radio button and then select desired day from the pull-down menu button.
The selectable days are as follows:

- Same time everyday

- Every week (days from Monday to Sunday)

To set the timer event on specified date,

select date entry with radio button and then type the date with (Year/Month/Date) format.

Ex.: Type [2007/12/20] if you specify [December 20, 2007].

Timer setting

This page is to set the timer to turn the projector off or on at a programmed day/date
and time. Follow the steps below for setting.
Click Timer on the main menu.

Present time set on the

projector

Select date

Select day

Set execute time

Event

action

This projector does not provide the built-in battery. The date and time information are lost when
the projector turns off (when "Eco" is set for the stand-by mode (Refer to p.74)), or the network
configuration is reset. The timer function is disable until time is set up correctly. When using the
NTP address for time setting, the current time is acquired at the projector starting up and the timer
function is activated after finishing the time setting correctly.

"---" will appear on the cur-

rent time when the time is

not set up correctly.