Sanyo 1080HD User Manual

AC power cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below and proper AC power cord must be used.
If the supplied AC power cord does not match your AC outlet, contact your sales dealer.

To POWER CORD 
CONNECTOR on your 
projector.

Ground

To the AC Outlet.

This projector uses nominal input voltages of 100 – 120 V AC and it 
automatically selects a correct input voltage. It is designed to work 
with the single-phase power systems having a grounded neutral 
conductor. To reduce the risk of electrical shock, do not plug into 
any other type of power system.
If you are not sure of the type of power being supplied, consult 
your authorized dealer or service station.
Connect the projector with all peripheral equipment before turning 
it on.

  

The AC outlet must be near this equipment and must be easily 
accessible.

Connect the AC power cord (supplied) to the 
projector.

For safety, unplug

 

the AC power cord when the projector is not 

in use.
When the projector is connected to an outlet with the AC 
power cord and the Main On/Off switch is on, it is in stand-by 
mode and consumes a little electric power. Turn the Main On/
Off switch off when the projector is not in use. 

✔