Sanyo 1080HD User Manual

Be sure to reset the Filter counter after cleaning or replacing the air filter. 

Turn the projector on and press the MENU button to display 
the On-Screen Menu. Select the Setting Menu with the Point 

ed

 buttons. Press the Point 

8

 or OK buttons to access the 

submenu items.  

Select Filter counter and then use the Point  8 button to 
select [Reset] and press the OK button. “Filter counter 
reset?” appears. Select [Yes] and then press the OK button.

Another confirmation dialog box appears, and select [Yes] to 
reset the Filter counter.

✔

Select Filter counter and 
use the Point  8 button to 
select [Reset] and press 
the OK button. “Filter 
counter reset?” appears.

Unplug the AC power cord before cleaning.

Gently wipe the projection lens with a cleaning cloth that contains 
a small amount of non-abrasive camera lens cleaner, or use a 
lens cleaning paper or a commercially available air blower to clean 
the lens. Avoid using an excessive amount of cleaner. Abrasive 
cleaners, solvents, or other harsh chemicals might scratch the 
surface of the lens.

When the projector is not in use, make sure that the automatic 
slide shutter is closed.

Unplug the AC power cord before cleaning.

Gently wipe the projector body with a dry soft cloth. When the 
cabinet is heavily soiled, apply a small amount of mild detergent 
and finish with a dry soft cloth. Avoid using an excessive amount 
of cleaner. Abrasive cleaners, solvents, or other harsh chemicals 
might scratch the surface of the cabinet.

When the projector is not in use, put it in an appropriate carrying 
case to protect it from dust and scratches.

Select [Yes] and press 
the OK button, then 
another confirmation 
box appears.

Select [Yes] again to 
reset the lamp counter.