Hitachi CMP4121HDU User Manual

9

•

When the indicating lamp blinks in green or the message
“POWER SAVE” or “OUT OF FREQUENCY” appears on
the screen, there is something unusual about the status of
reception. See “Symptoms That Seemingly Appear to be
Failures.”

Main power
switch

Main unit

Remote
controller

SUB POWER

Off

Off

When the main power switch 

is set to

OFF.

Lights red

Off

(standby)

When the main power switch (

) is ON,

and the 

button on the

remote control or the SUB POWER button
on the underside of the front of the frame
is OFF.

Lights or blinks

green

On

When the main power switch (

) is ON,

and the 

button on the remote control or

the SUB POWER button on the underside
of the front of the frame is ON.

23

• Avoid repeatedly turning the monitor on and off at short time

intervals. Failures might result from such operation.

• Turn off the main power switch (

) before leaving the monitor out

of use for an extended period of time.

• If a power failure occurs while the main unit is running, it would be

powered on upon recovery from the failure.  Turn off the unit main
power switch before leaving the main unit.

■ To turn the monitor power ON, press the main power switch (

) on the monitor

main unit to ON, and then press the SUB POWER button or the 

or  button on

the remote control.

■ To turn the monitor power OFF, press the SUB POWER button or the 

or 

button on the remote control, and then press the main power switch ( ) on the
monitor main unit to OFF.

•

During normal use, the main power switch (

) is set in the ON position, and the monitor

can then be turned ON/OFF using the SUB POWER button or the 

button on the

remote control.