Vidikron 140/150 User Manual

Table 3-1 gives a quick overview of the Vision 140/150 installation process. The sections 
following this one provide detailed instructions. 

 

1

Choose a location for the projector

2

Install primary projection lens

3

Install CineWide lens mounting assembly (stationary base 
plate or AutoScope lens motor – optional)

4

Mount the projector

5

Connect the VHD Controller to the projector

6

Connect signal sources to the VHD Controller

7

Connect external controller to RS-232 port (optional)

8

Connect other home theater components to 12-volt trigger 
outputs (optional)

9

Apply power to the projector 

37, 38

10

For rear-screen and/or ceiling-mount installations, select the 
proper picture orientation 

11

Primary lens adjustments: projected image size (zoom), 
position (shift) and focus

12

Install CineWide anamorphic lens (optional)

13

CineWide lens adjustments: projected image size (zoom), 
position (shift) and focus

14

Calibrate projector input 2 (DVI): perform Auto Setup, then 
adjust size/position, input levels, brightness/contrast etc., as 
needed for each channel

15

Adjust lamp output and optical aperture, as needed

16

VHD Controller input calibration: adjust the following for 
each VHD Controller input; save settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position

65 through 73