Toshiba TDP-TW300 User Manual

Operations

■ Correcting the keystone distortion

When the projector placement angle against the screen is changed while projecting the
image, the picture will undergo keystone (trapezoidal) distortion.
This projector is capable of correcting this keystone
distortion.

Press the KEYSTONE button.

The Keystone menu appears. By default, [Auto keystone] is selected.

Item

Description

Automatically corrects vertical and horizontal keystone distortion.
Press .

Screen shrinking at bottom Screen shrinking at top

Screen shrinking on the left Screen shrinking on the right

Auto keystone

V-keystone

H-keystone

Adjusting vertical distortion [Auto]

Press the

button.

The vertical and horizontal keystone distortion is automatically corrected. During
processing, the icon

will appear. When the processing is finished, the Key-

stone menu appears again. If you wish to make fine adjustment, use the

button

to select [V-keystone], and adjust with the

buttons.

Adjusting vertical distortion [Manual]

Press the KEYSTONE button.

Select [V-keystone] by the

button.

Use the

buttons for keystone adjustment.

Adjusting horizontal distortion [Manual]

Press the KEYSTONE button.

Select [H-keystone] by the

button.

Use the

buttons for keystone

adjustment.

When the adjustment is finished, the menu
automatically disappears. The menu also disap-
pears when the KEYSTONE or RETURN button is
pressed.

Before correction After correction

■ Easy setup

This function automatically adjusts the screen focus and corrects the keystone distor-
tion (Auto focus and Auto keystone functions).

Press the EASY SETUP button on the
projector or on the remote control.

The icon

will appear during processing.

• Before pressing the EASY SETUP button, be

sure to set Auto focus and select the items to
be adjusted by Auto adjustment

p.42

• With [Easy setup] in the Default setting

menu set to [On], the screen focus is
automatically adjusted and the keystone
distortion (vertical and horizontal) is corrected when the power is turned on.
(Automatic keystone distortion correction and auto-setting are selected by factory
setting.)

Note

• A message appears on the screen if the auto-adjustment fails.

Precautions

• Auto focus and Auto keystone functions are effective for projecting size from 40” to

100” diagonal (projection distance: 1.17 m to 3 m) at maximum zoom and 40” to 66”
diagonal (projection distance: 1.79 m to 3 m) at minimum zoom.

• Depending on the room temperature and brightness as well as the projecting

surface condition and material, the adjustment may not be properly made. When
such a case arises, adjust the screen focus manually.

• Improper adjustment or correction may also occur if the AF sensor is obstructed or

the window gets dirty. Remove the obstruction and clean the AF sensor window in
such a case.

■ Using auto setting

(Only for analog input from computer)

This function sets up the projector to the optimum state such as
sampling phase, frequency, screen position, and clamp for each
type of the input signal by using simple operations.

Press the remote control’s AUTO SET button.

For computer input, the

icon will appear during processing.

You can set as well by selecting [Auto setting] in the Image
adjustment menu

p.39

Notes

• The image may not be projected or auto adjustment/setting may not be performed

correctly for input signals other than those supported by the projector

p.86

p.87

• If auto setting fails adjustment, adjust manually with the Image adjustment menu

p.39

Using handy features

Control panel

Remote

Control

Before correction After correction

EASY SETUP

Remote

Control

EASY SETUP

Control panel

Remote

Control

EASY SETUP