Viewsonic A-CD-PJ502 User Guide
ViewSonic PJ502
23
COLOR
TEMP
Using the buttons
S
/
T
switches the mode of color temperature.
HIGH
MIDDLE
LOW
CUSTOM
To adjust CUSTOM
Selecting the CUSTOM and then pressing the button
Selecting the CUSTOM and then pressing the button
X
or the ENTER button on
the remote control displays a dialog to aid you in adjusting the OFFSET and/or
GAIN of CUSTOM mode.
OFFSET adjustments change the color intensity on the whole tones of the test
OFFSET adjustments change the color intensity on the whole tones of the test
pattern.
GAIN adjustments mainly affect color intensity on the brighter tones of the test
GAIN adjustments mainly affect color intensity on the brighter tones of the test
pat-
tern
Choose an item using the buttons
W
/
X
, and adjust the level using the buttons
S
/
T
.
You can display a test pattern for checking the effect of your adjustment by
press-
ing the ENTER button on the remote control. Each time you press the
ENTER but-
ton, the pattern changes as below.
No pattern
B
Gray scale of 9 steps
Ramp
Gray scale of 15 steps
COLOR
Using the buttons
S
/
T
adjusts the strength of whole color.
Strong
Q
Weak
* This item can be selected only at a video input. (except for SECAM signal.)
TINT
Using the buttons
S
/
T
adjusts the tint.
Green
Q
Red
* This item can be selected only at a video input.
SHARPNESS
Using the buttons
S
/
T
adjusts the sharpness.
Strong
Weak
PROGRES-
SIVE
Using the buttons
S
/
T
switches the progressive mode.
TV
FILM
TURN OFF
* This function performs only at an interlaced signal of a VIDEO input, a S-VIDEO
input or a COMPONENT VIDEO input of 525i (480i) or 625 (576i) signal.
* When the TURN ON is selected, the screen image will be crisper. But it may
* When the TURN ON is selected, the screen image will be crisper. But it may
cause a certain defect (for example, jagged line) of the picture at a quick moving
object. In such a case, please select the TURN OFF, even though the screen
image may lose the crisp.
* This function may cause a certain degradation of the picture. In such a case,
* This function may cause a certain degradation of the picture. In such a case,
please select the TURN OFF.
MY MEMORY
Selecting a mode of MY MEMORY using the buttons
S
/
T
and then pressing the
button
X
or the ENTER button on the remote control performs each function.
LOAD1
LOAD2
LOAD3
LOAD4
SAVE4
SAVE3
SAVE2
SAVE1
This projector has 4 numbered memories for adjustment data.
Performing the LOAD1, LOAD2, LOAD3 or LOAD4 loads the data on the mem-
ory whose number corresponds with the command's number, and adjusts the pic-
ture automatically depending on the data.
Performing the SAVE1, SAVE2, SAVE3 or SAVE4 puts the current adjustment
data on the memory whose number corresponds with the command's number.