Sony VPL-HS1 User Manual

Replacing the Air Filter

Ot
her

Notes

• Do not put your hands into the lamp replacement spot, or not

fall any liquid or object into it to avoid electrical shock or fire.

• Be sure to use the LMP-H120 Projector Lamp for replacement.

If you use lamps other than LMP-H120, the projector may
cause a malfunction.

• Be sure to turn off the projector and unplug the power cord

before replacing the lamp.

Disposal of used projector lamp

As the materials used in this lamp are similar to those
of a fluorescent lamp, you should dispose of a used
projector lamp in the same way as a fluorescent lamp.

Replacing the Air
Filter

The air filter should be replaced periodically. When
“Please replace the filter.” appears on the screen,
replace the air filter immediately.

Notes

• Replacing the air filter is very important to maintain the high

efficiency of the projector and to prevent a malfunction. When
the replacement message appears on the screen, replace the air
filter without delay.

• When removing the air filter from the projector, be careful that

no dust or object gets into the inside of the projector.

1 Place a protective sheet (cloth) beneath

the projector. Turn the projector over so
you can see its underside.

Note

Be sure that the projector is stable after turning it over.

2 Slide the release lever on the adjuster

outward and turn the adjuster clockwise to
remove the adjuster.

3 Push the knob on the filter cover to

remove the filter cover.

4 Remove the filter holder.

5 Remove the air filter from the filter holder

by holding the tab on the air filter.

6 Insert the new air filter into the filter holder

with the white surface up, then replace it in
the projector.

7 Replace the filter cover.

8 Attach the adjuster.

Release lever

Knob

Air filter

Filter holder

Tab