Viewsonic PJ1065 User Manual

The same adjustments and settings are available as with the Image and 
Options menus when the MENU button is pressed during display of the 
“NO INPUT IS DETECTED ON***”or “SYNC IS OUT OF RANGE 
ON***”message while no signal is received.

VOLUME

Volume Adjustment: Reduce VOLUME            Increase VOLUME

• When this function is used, audio input is automatically switched to video. The 

audio input can be switched by moving the DISK PAD left and right during the 

display of the volume adjustment bar. The volume adjustment bar is displayed by 

pressing VOLUME       or VOLUME      button.

BLANK

Select Blank Screen: Select the screen with the      /      button.The selected one 

(MyScreen, ORIGINAL or one colors) is displayed when the BLANK mode is ON.

MyScreen is a mode that the customer-customized screen is displayed. This is 

the blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL is a mode that the factory fixed screen is displayed.

• When MyScreen or ORIGINAL is selected, the screen is going blank after 

several minutes.

START UP

Select Start Up Screen:Select the screen in case of no signal input with the      /

     button. The selected one (MyScreen, ORIGINAL or TURN OFF) is displayed 

when no signal is input

MyScreen is a mode that the customer-customized screen is displayed. This is 

the blue screen at the factory setting. Refer to the description of MyScreen below.

ORIGINAL is a mode that the factory fixed screen is displayed.

TURN OFF displays the blue screen.

• When MyScreen or ORIGINAL is selected, the screen is going blank after 

several minutes.

MIRROR

Operation Start/Stop: Press the                button.

Select Mirror Status: Select the mirror status with the       and       buttons.

MENU COLOR Select Menu Background Color: Select the color with the      and       buttons.

LANGUAGE

Operation Start/Stop: Press the                 button.

Select Menu Display Language: Select the language with the      and     buttons.

AUTO OFF

Operation start/stop: Press the                 button.

Set AUTO OFF: Set 1-99 minutes with the       and       buttons. The system 

automatically enters the standby mode when a signal is not received for the set 

time.

Clear AUTO OFF: Select the STOP (0 min.) with the        button. When STOP is 

selected the system does not enter the standby mode even if no signal is 

received.

SYNC ON G

Operation Start/Stop: Press the                 button.

SYNC ON G Valid: Select the TURN ON with the       button.

SYNC ON G Invalid: Select the TURN OFF with the       button.

• May not be displayed correctly with some input signals when the SYNC ON G is 

valid. In such cases, remove the signal connector so that no signal is received, 

set the SYNC ON G to invalid, and reconnect the signal.

WHISPER

Set / Clear WHISPER Mode: Press the                button. When WHISPER is 

selected, the WHISPER mode is active. In the WHISPER mode, acoustic noise 

level from the unit is reduced, and brightness level on screen is a little lower.