Sony VPL-CX20 User Manual
23
The Signal Menu
Adj
u
st
men
ts and
Set
tings Usi
tings Usi
ng a
Me
n
u
The Signal Menu
The Signal menu is used to adjust the input signal.
Note that if the projector is used for profit or for public viewing, modifying the original picture by
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.
switching to the wide mode may constitute an infringement of the rights of authors or producers,
which are legally protected.
Sel:
Set:
Back:
Exit:
Picture
Signal
Function
Setup
Installation
Information
12
1344
H: 235 V: 34
Adjust Signal
Dot Phase:
Shift:
H Size:
Sel:
Set:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Adjust Signal
Wide Mode:
Scan Converter:
Off
On
Adjust Signal...menu
Setting items
Functions
Initial setting
Adjust Signal...
Dot Phase
Adjusts the dot phase of the LCD panel and the signal
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.
output from a computer.
Adjust the picture further for finer picture after the
picture is adjusted by pressing the APA key.
H Size
Adjusts the horizontal size of a picture output from a
computer. Adjust the setting according to the dots of
the input signal.
For details, see page 42.
computer. Adjust the setting according to the dots of
the input signal.
For details, see page 42.
Set according to
the input signal
the input signal
Shift
Adjusts the position of the picture. H adjusts the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
horizontal position of the picture.V adjusts the vertical
position of the picture. As the setting for H increases,
the picture moves to the right, and as the setting
decreases, the picture moves to the left.
As the setting for V increases, the picture moves up,
and as the setting decreases, the picture moves down.
Use the
b
or the
B
key to adjust the horizontal
position and the
v
and
V
key for the vertical position.
Set according to
the input signal
the input signal
Wide Mode
Sets the aspect ratio of the picture.
• Off: When a picture with a ratio of 4:3 is input.
• On: When a picture with a ratio of 16:9 (squeezed) is
• Off: When a picture with a ratio of 4:3 is input.
• On: When a picture with a ratio of 16:9 (squeezed) is
input from a DVD player.
Off
Scan Converter
Converts the signal to display the picture according to
the screen size.
When set to “Off,” displays the picture while matching
one pixel of input picture element to that of the LCD.
The picture will be clear but the picture size will be
smaller.
the screen size.
When set to “Off,” displays the picture while matching
one pixel of input picture element to that of the LCD.
The picture will be clear but the picture size will be
smaller.
On
Note