Sony VPL-PX32 User Manual
14
(GB)
Location and Function of Controls / Installing the Projector
qk
MENU/TAB key
Functions as a MENU key.
ql
APA (Auto Pixel Alignment) key
w;
VOLUME +/– keys
wa
LEMS key
This key does not work in the unit.
ws
PJ/NETWORK (Projector/Network) selector
switch
Set this switch to PJ always.
Set this switch to PJ always.
wd
COMMAND ON/OFF switch
When this switch is set to OFF, no key on the Remote
Commander function. This saves the battery power.
Commander function. This saves the battery power.
wf
Transmission indicator
Lights up when you press a key on the Remote
Commander.
This indicator does not light up when you use the laser
pointer.
Commander.
This indicator does not light up when you use the laser
pointer.
wg
Infrared transmitter
wh
LASER key
Emits laser beam from the laser transmitter when you
press this key.
press this key.
Battery installation
1
Push and slide to open the lid, then install the two
size AA (R6) batteries (supplied) with the correct
polarity.
size AA (R6) batteries (supplied) with the correct
polarity.
2
Replace the lid.
Notes on batteries
• Make sure that the battery orientation is correct when
inserting batteries.
• Do not mix an old battery with a new one, or
different types of batteries.
• If you will not use the Remote Commander for a
long time, remove the batteries to avoid damage
from battery leakage. If batteries have leaked,
remove them, wipe the battery compartment dry and
replace the batteries with new ones.
from battery leakage. If batteries have leaked,
remove them, wipe the battery compartment dry and
replace the batteries with new ones.
Notes on Remote Commander operation
• Make sure that there is nothing to obstruct the
infrared beam between the Remote Commander and
the remote control detector on the projector.
the remote control detector on the projector.
• The operation range is limited. The shorter the
distance between the Remote Commander and the
projector is, the wider the angle within which the
commander can control the projector.
projector is, the wider the angle within which the
commander can control the projector.
Installing the Projector
This section describes the installation arrangements
for installing the projector.
for installing the projector.
Horizontal center
of the screen
of the screen
The distance between the lens and the screen varies
depending on the size of the screen. Use the following table
as a guide.
depending on the size of the screen. Use the following table
as a guide.
Unit: m (feet)
Screen
size
40
60
80
100
120
150
200
300
(inches)
Minimum
1.5
2.3
3.1
3.9
4.6
5.8
7.8
11.7
Distance (4.9) (7.5) (10.0) (12.6) (15.2) (19.1) (25.5) (38.4)
Maximum
1.8
2.8
3.7
4.7
5.7
7.1
9.5
14.3
Distance (6.0) (9.1) (12.3) (15.4) (18.6) (23.3) (31.2) (46.9)
Distance between the screen
and the center of the lens
and the center of the lens
;;;;;
;;;;;
;;;;;
;;;;;
Be sure to install
the battery from
the
the battery from
the
#
side.
Slide while
pressing down
on the lid.
pressing down
on the lid.