Sony VPL-HW15 User Manual

 

58

This section describes about the other functions, how to solve the problems, how to 
replace the lamp and air filter, etc.

Control for HDMI is an HDMI standard 
mutual control function which uses the 
HDMI CEC (Consumer Electronics 
Control) specification. By connecting a 
variety of Control for HDMI compatible 
equipment such as a hard disk Blu-ray Disc 
player, a DVD player/recorder, an AV 
amplifier, etc. to a Control for HDMI 
compatible TV or a projector with an HDMI 
cable, the equipment connected will 
synchronize with the TV or the projector 
when either is operated.

• Connect and assign the settings of each 

equipment appropriately.

• Do not turn off the main power of the 

equipment.

• Set the input setting of the projector to the 

HDMI input which the equipment is 
connected.

• Check if the picture from the equipment 

appears appropriately on the projector.

Use an HDMI cable to connect the projector 
and the Control for HDMI compatible 
equipment. Use a cable that has acquired the 
HDMI logo.

Be sure to assign the appropriate 
connections for both the projector and the 
Control for HDMI compatible equipment 

connected to the projector. For settings of 
the projector, see page 52. For settings of the 
Control for HDMI compatible equipment 
connected to the projector, refer to its 
operational instructions. When a equipment 
that is compatible with the “Control for 
HDMI - Easy Setting” is connected to the 
HDMI input of the projector, if you turn the 
Control for HDMI function setting of the 
projector on, the Control for HDMI function 
setting of the connected equipment will also 
turn on.

• Basic operations (playback, stop, menu 

operations, etc.) of the connected 
equipment is available by using the remote 
control of the projector.

• By turning on or playing back the 

connected equipment, the projector will 
turn on and the input setting will switch to 
the terminal of the connected equipment 
automatically.

• By turning the power of the projector off, 

the power of the connected equipment will 
also turn off automatically.

• By selecting equipment connected to the 

projector desired to operate with SYNC 
MENU button on the remote control of the 
projector, the power of the selected 
equipment will turn on and the input will 
switch to the terminal of the connected 
equipment automatically.

• By changing the language setting of the 

projector, the language setting of the 
connected equipment will also change to 
the same language automatically.

• The available functions of the Control for 

HDMI differ depending on each equipment. 
Refer to the operating instruction of each 
equipment.