Sony VPL-PX11 User Manual

19

 (GB)

I / 

1

+
–

HELP

LAMP/

COVER

TEMP/

FAN

POWER

SAVING

ON/

STANDBY

RESET

APA

VOLUME

ENTER

INPUT

MENU

Selecting the Menu Language / Projecting

Press the 

M or m key to select LANGUAGE, then

press the 

, or ENTER key.

Press the 

M or m key to select a language, then

press the 

< or ENTER key.

The menu changes to the selected language.

Press the MENU key.
The menu display disappears automatically if no key
is pressed for one minute.

Rear remote
control detector

ON/STANDBY
indicator

APA key

APA key

After all equipment is connected completely, plug
the AC power cord into the wall outlet.
The ON/STANDBY indicator lights in red and the
projector goes into the standby mode.

Press the 

I 

/

 

1 key to turn on the projector.

The ON/STANDBY indicator lights in green.

Turn on all equipment connected to the projector.
Press the INPUT key to select the input source.

INPUT-A: Selects the video signal input from the

INPUT A connector.

INPUT-B: Selects the video signal input from a

computer connected to the INPUT B
connector.

VIDEO: Selects the video signal input from a

VCR connected to the VIDEO jack on the
VIDEO IN connectors.

S-VIDEO: Selects the video signal input from a

VCR connected to the S VIDEO connector on
the VIDEO IN connectors.

Depending on the type of computer you have, for
example a notebook, or an all-in-one LCD type,
you may have to switch the computer to output to
the projector by pressing a certain combination of
keys (e.g., 

, etc.), or by changing your

computer’s settings.

Turn the zoom ring to adjust the size of the
picture.

Turn the focus ring to adjust the focus.

Looking into the lens when the projector is projecting
an image may cause injury to your eyes.

Press the PIC MUTING key on the Remote
Commander. To restore the picture, press the PIC
MUTING key again.