Sony PX35 User Manual

31

 GB

The PICTURE SETTING Menu

Adj

u

st

ment

s and

 Set
tings Usin

g the

 Men

u

Make the setting or adjustment on an 
item.

• When changing the adjustment level:

To increase the number, press the 

M

 or 

,

 key.

To decrease the number, press the 

m 

or 

< key.

Press the ENTER key to restore the 
previous screen.

• When changing the setting:

Press the 

M or m key to change the 

setting.
Press the ENTER or 

< key to restore 

the previous screen.

Press the MENU key. 
The menu disappears automatically if a key 
is not pressed for one minute.

Press the RESET key on the Remote 
Commander. 
“Complete!” appears on the screen and the 
settings appearing on the screen are reset 
to their factory preset values. 
Items that can be reset are: 
• “Contrast,” “Brightness,” “Color,” “Hue,” 

“Sharpness” and “RGB Enhancer” in the 
Adjust Picture... menu.

• “Dot Phase,” “H Size,” and “Shift” in the 

Adjust Signal... menu.

The settings are automatically stored in the 
projector memory. 

If there is no input signal, “Cannot adjust 
this item.” appears on the screen.

You can set the display position of the menu, 
intensity of the background picture and tone 
of the menu items as you like.

The PICTURE SETTING menu is used for 
adjusting the picture or volume. 
Items that cannot be adjusted depending on 
the input signal are not displayed in the 
menu. 

Selects the picture mode.

Dynamic: Emphasizes the contrast to 

produce a “dynamic” picture.

Standard: Normally select this setting.  If 

the picture has roughness with the 
“Dynamic” setting, this setting reduces 
the roughness.

The unit can store the setting values of the 
following sub menu items for each 
“Dynamic” or “Standard” picture mode 
separately.