Sony SRX-R105 User Manual

27

GB

COLOR/FRAME Window

  

Cha

pt

er 4  

A

d

jus
tment

s

 a

nd Se

tt

ing
s

 Us

ing t

he SRX

 Con

tr

oller

Adjusts the picture quality of the input signal.
Clicking 

 increases the setting value, and 

decreases it.
Clicking the RESET button resets all the settings to the 
factory preset values. 

Contrast: Adjusts the picture contrast. The higher the 

setting, the greater the contrast.

Brightness: Adjusts the picture brightness. The higher the 

setting, the brighter the picture.

Color: Adjusts the color intensity. The higher the setting, 

the greater the intensity.

Sharpness: Adjusts the picture sharpness. The higher the 

setting, the sharper the picture. The lower the setting, 
the softer the picture.

The COLOR/FRAME window is used to adjust the input 
signal.
When the screen mode is set to “dual-screen” or “quad-
screen,” the items can be independently adjusted for each 
input channel displayed on the screen.

Adjusts the items so that you can obtain precise color 
reproduction.
If the color of an image is not correct, check the setting of 
“Color Space” first.
Select the setting from the drop-down list displayed by 
clicking .

Color Space: Selects the color gamut.

709: Select when projecting a normal high-definition 
signal or RGB signal.
DCDM: Select when projecting a special source such 
as a movie.
CIEXYZ: This item is for future use.

Color Temp (temperature): Selects the color 

temperature from among “DCI W/P,” “6500,” 
“CUSTOM1,” “CUSTOM2,” “CUSTOM3” and 
“CUSTOM4.” “DCI W/P” is preset in CUSTOM1 to 
4 settings in the factory.

“6500” is recommended for a normal high-definition 
signal or RGB signal. Set this item to “DCI W/P” to 
project a movie source.

Gamma: Selects a gamma correction curve from among 

“2.6,” “2.2”  and “1.8.”

The smaller the value, the brighter the image. Select 
the setting depending on the signal source. “2.2” is 
recommended to project a normal high-definition 
signal or RGB signal.