Sony 76c User Manual

Selecting the image source lets you switch between images input from 
different pieces of equipment connected to the projector (such as a 
computer and DVD player). If you don’t see the image you want, 
press one of the following buttons on the remote control:

■

Comp

Press this button to move through the following options: 

Computer (Auto)

, 

Computer (RGB)

, and 

Computer 

(Component Video)

.

■

S-Video

Press to select 

S-Video

.

■

Video

Press to select 

Video

.

You can also press the 

Source Search

 button on the remote control 

or projector until the correct device image is projected. If a projected 
image fails to appear, see the next section for help.

Once you see your image, turn to page 37 for instructions on focusing 
and making other image adjustments. 

If you see a blank screen or a blue screen with the message 

No Signal 

after turning on your computer or video source, try the following:

■

Make sure the cables are connected correctly, as described in 
Chapter 1.

■

Make sure the power light is green and not flashing and the lens 
cap is off. 

■

Make sure you’ve selected the correct image source; see the 
previous section. Allow a few seconds for the projector to sync up 
after pressing the button. 

■

Check the Signal menu to make sure the correct input source is 
selected. See page 56.