Sony 76c User Manual
Projecting
41
To change the color mode, press the
Color Mode
button on the
remote control until you see the mode you want. The currently
selected setting appears in the upper right corner of the screen. You
can also use the projector menu system to change the color mode in
the Image menu (see page 54).
selected setting appears in the upper right corner of the screen. You
can also use the projector menu system to change the color mode in
the Image menu (see page 54).
Adjusting the Volume
You can use the buttons on the remote control or projector to increase
or decrease the volume the projector’s built-in speaker. Press the
or decrease the volume the projector’s built-in speaker. Press the
button to increase the volume, or the
button to decrease it. A
volume gauge appears on the screen while the volume is being
adjusted.
adjusted.
Shutting Down the Projector
When you’ve finished using the projector, follow the recommended
procedure to shut it down.
procedure to shut it down.
1. If you’re using a computer, shut it down first; otherwise you may
not be able to see your computer’s display to shut it down
properly.
properly.
2. To turn off the projector, press the P
Power
button on the
projector or remote control.
You see this confirmation message:
(If you don’t want to turn it off, press
any other button or wait a few
seconds until it disappears.)
(If you don’t want to turn it off, press
any other button or wait a few
seconds until it disappears.)
note
Volume controls
note
When the projector has not
received any input signals for
30 minutes, it automatically
turns off the projector lamp
and enters “sleep mode.” This
conserves electricity, cools the
projector, and extends the life
of the lamp. If you are done
using the projector, unplug
the power cord. If you want
to start projecting again, press
the P
received any input signals for
30 minutes, it automatically
turns off the projector lamp
and enters “sleep mode.” This
conserves electricity, cools the
projector, and extends the life
of the lamp. If you are done
using the projector, unplug
the power cord. If you want
to start projecting again, press
the P
Power
button. You